Ubiquiti NanoStation 2 2.4GHz 10dBi Radio and Antenna (Dual Polarity 60°)
Indoor/Outdoor airMAX® CPE
Featuring a panel antenna and dual-polarity performance, the NanoStation®M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor.
Product Details
Low cost 2.4 GHz AP/ CPE with built-in 10 dBi antenna.
Excellent receiver sensitivity and superb performance. ALIX RouterBoards running DD-WRT or Compex Outdoor with external omni antenna make ideal APs for these CPE units and makes system deployment cost very low.
Supplied complete with POE power supply and UK mains adaptor.
Mounting bracket is fixed to pole using cable ties and we recommend use of Jubilee clips (hose clips) instead.
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment.
Package Contents
- 1x Mounting Ties
- 1x PoE Injector
- 1x Ubiquiti NanoStation 2
- 1x Mains Power Lead
Product Specifications
System
| Extras | Reset Button |
| Storage Type | Flash |
| LEDs | Yes |
| Operating System | AirOS |
| Processor Name | Atheros AR2315 |
| Storage | 4 MB |
| Router Throughput 2.4GHz | 25 Mbps |
| Memory Type | SDRAM |
| Processor Speed | 180 MHz |
| Processor Architecture | MIPS 4KC |
| Memory | 16 MB |
| Processor Cores | 1 |
Networking
| 10/100 PoE In | 1 |
Wireless
| Gain | 10 dBi |
| Channel Width | 10, 5 and 20 MHz |
| Transmit Power | 398 mW |
| Antenna Type | Sector |
| Polarisation Directions | Vertical and Horizontal |
| Beamwidth Vertical | 60 ° |
| Beamwidth Horizontal | 30 ° |
| Polarisation | Dual Linear |
| Rx Sensitivity | -97 dBm |
| Frequency Max | 2462 MHz |
| Wireless Standards | 802.11b/g |
| Band | 2.4 GHz |
| RF Connectors | SMA RP Jack |
| Frequency Min | 2412 MHz |
The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed.
Regional regulations must be observed when deploying radio equipment.
Power Input
| PoE Max | 12 V |
| PoE Min | 12 V |
| PoE Ports | 1 |
| PoE Type | Passive |
| Current Min | 1 A |
| Power Consumption | 4 W |
| PoE Pins | 4/5(+),7/8(-) |
Physical
| Mounting | Pole |
| Case Material | Plastic |
| Dimensions | 30 x 264 x 80 mm |
| Weight | 400 g |
Environmental
| Operating Humidity Min | 5 % RH |
| Operating Temperature | -20 to 75 °c |
| Shock and Vibration | ETSI300-019-1.4 |
| UV Resistant | Yes |
| Operating Humidity Type | Condensing |
| Operating Humidity Max | 95 % RH |
Compliance
| Certifications | RCM, IC RS210, FCC Part 15.247 and CE |
| RoHS | Yes |
Reviews
There are no reviews yet.